Friday, August 30, 2019

Engineering Jobs in HP

HINDUSTAN PETROLEUM CORPORATION LIMITED Visakh Refinery Malkapuram, Visakhapatnam - 530011, Andhra Pradesh, India. CIN No. L23201MH1952GOI008858
invites application for the posts of Junior Engineer (Electrical)

1. Maintenance Technician-Electrical
2. Maintenance Technician -Instrumentation
3. Maintenance TechnicianMechanical

Vacancies: 20



Pay Scale: 10900 – 34800/-

Educational Qualifications:  Diploma in Electrical Engineering Diploma in Instrumentation or Instrumentation and Control or Electronic and Instrumentation or Instrumentation and Electronics or Electronics and Communication or Electronics and Telecommunication Engineering. Diploma in Mechanical Engineering

Description of Duties
Maintenance Technician Electrical  The major scope of Maintenance Electrical technicianThe major scope of Maintenance Electrical technician includes carrying out corrective, preventive and predictive maintenance of various electrical equipment across the refinery. This includes complete testing of motors, transformers, Circuit breaker, starter modules, MCCBs, relays (primary and secondary injection), tan delta tests, oil BDV testing etc. The technicians shall be capable troubleshooting/ rectifying PA systems, UPS, Battery chargers, battery banks, soot blowers, carrying out generators testing, end termination & straight through joints of cables up to 33 kV, usage of cable fault kits, HT and LT panels as well as cable hi-pot tests. They shall be capable of reading electrical drawings and carrying out modifications or rectification of control and power circuits in HT and LT panels as per requirement. They shall be capable of monitoring healthiness of SCADA system, carrying out Infrared thermography and preparation of reports for the same in Word/ Excel. The above activities need to be carried out during general shift, shifts, turnaround shut downs, etc.





Maintenance Technician Instrumentation The role and responsibilities includes carrying out corrective, preventive and predictive maintenance of various instruments and control systems in Refinery. This includes dropping, calibration & re installation of different types of pressure, flow, level and temperature instruments as well as analyzers. Preparation of calibration reports, PM check reports, check lists, etc. Wet leg filling & calibration of level instruments, un plugging of lead lines & proving clear of all tapings. Checking, overhauling & calibration of different types of instruments, final control elements (Control valves), analyzers, solenoid valves, etc. Checking & troubleshooting of the tankage instruments like servo gauges, radar gauges, RIM seal systems, etc. Checking of safety instruments like, smoke detectors, fire detectors, gas detectors, flame scanners, manual call points, clean agent protection system, etc. Checking of DCS, PLC, SCADA, SOE, HMI, CCTV, Wireless and MMS systems. Checking of instrument loops, junction boxes, unit trip & interlock systems, start-up and commissioning assistance, etc. The above activities need to be carried out during general shift, shifts, turnaround shut downs, etc.

Maintenance Technician Mechanical Perform maintenance activities of all production equipment which includes, but not limited to, Pumps, Compressors, Fans, Boilers, Heaters, Heat Exchangers, Coolers/ Condensers, Pipelines, Pressure Vessels, Soot Blowers, Valves, Tanks, Steam Turbines, Mixers, Agitators, Gas turbines, filters, level gauges, lifting tools and structural. Perform mechanical assemblies, dismantling, alignments, bolt torqueing, greasing, trip checks, balancing, measurements, machining, drilling, gas cutting, welding, brazing, lapping, painting, stenciling, insulation works, protective coating jobs and troubleshooting & repair works of all kinds of hydraulic/pneumatic/electrical operated mechanical equipment. Perform civil works such as drilling, grouting, piling, shuttering, piling, RCC/ PCC works, excavation, plumbing, Carpentry jobs and laying underground piping. Operate all kinds of mechanical tools which includes, but not limited to, Spanners, Torque Wrenches, Chain Blocks, EOT cranes, Test pumps, test benches, Power tools, and also the mechanical instruments. Read and interpret equipment manuals and work orders to perform required maintenance and service. Diagnose problems, replace or repair parts, test and make adjustments. Perform regular preventive maintenance on machines, equipment and plant facilities and record the observations in log sheets. Inspect incoming materials and conduct QC/QA checks. Comply with safety regulations and maintain clean and orderly work areas

Starting Date for Submission of Online Application 01 September 2019

Last Date for Submission of Online Application 30 September 2019

Click here to apply Online



For more details click here or visit https://hindustanpetroleum.com

Junior Electrical Engineer Jobs- 500 Vacancies

Junior Engineer (Electrical):

Vacancies: 500

Pay Scale: 10900 – 34800/-

Age Limit : 37 Years

Start date of receiving online applications 20.08.2019




Closing date of online application 09.09.2019 (11:59 pm)

Click here for other details

Friday, August 9, 2019

Engineering Apprentices Recruitment

TAMILNADU STATE TRANSPORT CORPORATION (CBE) LTD, COIMBATORE, GOVT OF TAMIL NADU Notification for engagement of Apprentices under Apprenticeship (Amendment) Act 1973
Published @ https://engineeringjobsinindia.blogspot.com/

Graduate Apprentices

No. of Vacancies: 34

Technician Diploma Apprentices

No. of Vacancies:  62

Age Limit: As per Apprenticeship rules



Stipend: 
Graduate Apprentices: 4984/- (Per Month)

Technician Diploma Apprentices: 3542/- (Per Month)

Qualification:

Graduate Apprentices: A Degree in Engineering or Technology granted by a Statutory University in relevant discipline.  A Degree in Engineering or Technology granted by an Institution empowered to grant such degree by an Act of Parliament in relevant discipline.  Graduate examination of Professional bodies recognized by the State Government or Central Government as equivalent to above.

Diploma Apprentices: A Diploma in Engineering or technology granted by a State Council or Board of Technical Education established by a State Government in relevant discipline.  A Diploma in Engineering or Technology granted by a University in relevant discipline.  A Diploma in Engineering and Technology granted by an Institution recognised by the State Government or Central Government as equivalent to above.




MINIMUM PHYSICAL STANDARDS: As prescribed in Clause 4 of the Apprenticeship Rule 1992, and amendments thereof if any. VI. DURATION OF TRAINING: The duration of Apprenticeship training will be for a period of one year as per Apprenticeship (Amendment) Act 1973.

PREVIOUS TRAINING/EXPERIENCE: Candidates who have already undergone or are currently undergoing apprenticeship under Apprenticeship (Amendment) Act 1973, and/or having one year or more experience are not eligible to apply.

SELECTION PROCEDURE: Board of Apprenticeship Training (SR) is interested with the task of preparation of shortlist from the online application data. Shortlisting of candidates will be done based on the percentage of marks obtained in the basic prescribed qualification as applicable to the respective disciplines. Shortlisted candidates shall be intimated through their registered Email id. Shortlisted candidates have to appear for Certificate Verification at Board of Apprenticeship Training (SR), Chennai.
1. Online Application starting date 05.08.2019
2. Last date for enrolling in NATS portal 19.08.2019
3. Last date for applying TAMILNADU STATE TRANSPORT CORPORATION (CBE) LTD, COIMBATORE 26.08.2019
4. Declaration of Shortlisted list 28.08.2019
5. Verification of certificates for shortlisted candidates. 04.09.2019 & 05.09.2019



Click here for official notification

FOR MORE DETAILS CLICK HERE or visit http://boat-srp.com  

Mechanical Engineering Diploma + CAD jobs in India

Centre for Development of Advanced Computing ADVERTISEMENT No .CDAC (T)/RCT/02/2019 date:16/10/ 2019 Invites applications for the post of...